Product description
4.2. LED status display
Status
1. Stand-by & idle mode
2. Connected mode
3. Pairing mode
4. Switch on
5. Switch off
6. Battery status
7. Charging
8. Charging complete
9. Reset
28
LED display
Blue LED lights up every 3 seconds
Blue LED lights up every 5 seconds
Red and blue LEDs light up alternately
Blue LED lights up for 1 second
Red LED lights up for 1 second
Indicates the battery status after
the system is switched on:
over 50%, blue LED lights up for 1 second
·
between 10%-50%, red and blue LEDs light
·
up at the same time for 1 second
under 10%, red LED lights up for 1 second
·
LED lights up red
LED lights up blue
Red and blue LEDs light up at the same time
5. Basic functions
5.1. Switch device on/off
Switch on
To switch on the device, press and hold the phone button for about five seconds.
You will hear a sound signal and the blue LED lights up for approx. one second.
In stand-by mode, the blue LED lights up every three seconds.
Switch off
To switch off the device, press and hold the phone button until you will hear a
long sound signal. The red LED lights up briefly and the device is switched off.
5.2. Volume control
To increase the volume:
Press and hold the "+" button until the desired volume is reached.
To reduce the volume:
Press and hold the "-" button until the desired volume is reached.
Note (second function in A2DP mode):
> To select the next music track, press and release the "+" button.
> To select the previous music track, press and release the "-" button.
Basic functions
29