Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MA 2Port Node
The MA 2Port Node allow the conversion of DMX via different protocols to DMX 512, using
Ethernet. The MA 2Port Node features 1Gbit capability und fit perfectly into the MA system which is
based on this high speed to ensure maximum performance. Optimised for touring and installations
purposes, both have a rugged steel housing for a long life even under harsh conditions. The front
panel offers a menu button, a USB connector and a 2" colour TFT as well as four LEDs displaying
the current status. Additionally there is a USB –port for optionally update of firmware via USB-stick.
The mains switch is located on the back, along with the powerCON and etherCON connectors, as
well as two DMX ports. The MA 2Port Node is fully configurable from the grandMA2 consoles. To
achieve the highest flexibility, each DMX port can be individually configured as DMX-in or DMX-out.
MA 2Port Node is also available as "onPC" versions, meaning that the MA 2Port Node onPC can be
used in combination with the free-of-charge grandMA2 onPC software running on a computer to
provide 1,024 parameters (1k version) or 2,048 parameters (2k version). Furthermore MA 2Port
Node onPC can be combined with the MA onPC command wing and MA onPC fader wing for
23
parameter expansion.
Werbung
Inhaltsverzeichnis
