Dawicontrol DC-2974 PCI Kurzanleitung Seite 18

- 18 -
setting for these devices. Hostadapters supplied with a SCSI setup
ignore this parameter and use the setup settings instead.
/PS=.. Specifies the interval (in minutes) after which inactive drives are to be
switched off.
/SN=x,..,x This parameter specifies the devices to be operated in Synchronous
Data Transfer mode if this mode is supported by these devices,
independent of the Windows settings. Entering "/SN=1,4", for example,
enables the synchronous mode for SCSI-IDs 1 and 4. Hostadapters
supplied with a SCSI setup ignore this parameter and use the setup
settings instead.
/!DISC=x,..,x Specifies the devices for which the "disconnect" settings of
Windows device manager are to be ignored and with it this function is
not available.
Quick Guide
the