Using The Wi-Fi Cast; Enabling Wi-Fi Direct To Share Through Smartshare; Using Smartshare - LG -E610 Benutzerhandbuch

Using the Wi-Fi Cast

You can share your music, picture and video
content between users who use Android
Phones connected via the same Wi-Fi & Wi-
Fi Directed network.
Check your Wi-Fi & Wi-Fi Directed network
in advance and make sure the users are
connected to the same network.
1 > Apps tab > Settings >
Touch
More from the WIRELESS & NETWORKS
> Wi-Fi Direct
2 Touch the wi-fi direct checkbox to turn
on.
3 Select a device to connect from the
scanned device list.
4 Touch Connect.
Enabling Wi-Fi Direct to share
through SmartShare
Wi-Fi Direct automatically scans nearby Wi-
Fi Direct devices and the searched devices
are listed as they are found and you can
select a specific device to share multimedia
data through Smart Share.
NOTE: Wi-Fi Direct cannot be enabled
while using other Wi-Fi functions.
1 > Apps tab > Settings >
Touch
More from the WIRELESS & NETWORKS
> Wi-Fi Direct
2
Select a device to connect from the
scanned device list.
CREATE GROUP – Touch to activate group
owner mode, which enables the legacy Wi-Fi
devices to connect by scanning your phone.
In this case you must enter the password
that is set in Password.
NOTE: When your phone becomes
a group owner, it will consume more
battery power than when it is a client.
Wi-Fi Direct connection does not provide
Internet service. Additional costs may
be incurred when connecting and using
online services. Check data charges
with your network provider.

Using SmartShare

SmartShare uses DLNA (Digital Living
Network Alliance) technology to share digital
content through a wireless network.
Both devices must be DLNA certified to
support this feature.
To turn SmartShare on and allow sharing
contents
1 > Apps tab > SmartShare
Touch
2 and select Settings.
Press
3
Touch Discoverable checkbox to turn off.
29