Inputting The Price; Tips To Save Energy; Reset - X4-Life Inspector III Bedienungsanleitung

Inputting the price

Please look at your electricity bill or ask your local electricity supplier, what your
price per kilowatt hour is.
• Press FUNCTION till you get to the Mode 7 Time/Price.
• Press the COST button till the display starts blinking.
• With the FUNCTION button you can now adjust the digit you want to enter.
• With the buttons UP/DOWN you can adjust the value at the selected digit.
• Approx. five seconds without any input or pressing COST will exit the input mode.
• From this moment on all calculations are made based on the price that has been
input and will be added to the saved costs.

Tips to save energy

The price entered should always be up­to­date.
Monitor the power consumption of a device for a week to get a good average and
multiply the cost with 52 to estimate the cost of the device per year.
Find your household "power hogs"! Check the amount of electricity that your
devices consume. Most TV's and electronic devices have a so called "stand­by"
mode. When not in use, switch off these devices fully to save costs. Even when
the rinse and spin cycle of your washing machine has been completed, hose
24
and temperature sensors still require and consume an unnecessary amount of
electricity. The easiest way to fight unnecessary power consumption is to simply
use a multiple socket outlet with a switch.

Reset

Reset will reset all values to factory values. All saved and accumulated data are
deleted. A total reset is sometimes needed when:
• You want to delete all data.
• The device is showing no reaction.
Press the RESET button carefully with a blunt object. After a short moment the
display will show mode 1.
25