Cleaning And Maintenance; Specifications; Box Contents; Connection - X4-Life Inspector III Bedienungsanleitung

e.g., buckets, vases or plants. Liquids can enter the case/housing or the plug
connectors. This unit may only be used in dry rooms.
D. There is no reason for the user to open this device. This unit may only be opened or
repaired by a person authorized to do so or who has knowledge of electrical safety
regulations.
E. Always use a soft, dry and lint­free cloth to clean the unit's exterior. If the device is
extremely dirty you can use a soft cloth, dampened with water or a mild cleaning
solution to clean.
F. If you have any doubt about the approach, the security, the handling or the
correct connection of the device, or questions should arise which are not clarified
in the course of this user guide, please turn to an authorized dealer or contact our
technical information.

Cleaning and maintenance

DANGER
Always use a soft, dry and lint­free cloth to clean the unit's
exterior. If the device is extremely dirty you can use a soft cloth,
dampened with water or a mild cleaning solution to clean.
Never use any abrasive or harsh cleaning agents (e.g. alcohol, petrol or thinners)
as these could damage the controls, casing or any markings and labels found on
the device.
20

Specifications

Power Supply
Maximum current
Wide voltage range

Box contents

Inspector III
Instruction manual

Connection

• Plug the Inspector III to a correctly installed mains socket
• Input your price per kilowatt/h
• Connect the devices you want to monitor with the Inspector III
The word OVERLOAD will appear as warning on the display if the power
consumption of the connected device exceeds 3680 watts.
230 V~/50 Hz | 240 V~/50 Hz
max. 16 A
230 V to 250 V
21