11
Explanations on functionality
GB
1.)
Read Encoder
1.1) Encoder type (Read Type)
1.2) Position (Read Position)
1.3) Serial Number
1.4) Article Number
1.5) Pulses per revolution (Pulses/Rev)
Baumer_Handheld-Programming-Tool-Z-PA-EI-H_OI_DE-EN_1708.pdf
Der Drehgebertyp wird angezeigt
Delivered is the current encoder shaft position related to the
present reference pulse position. By indicating the current
position with every shaft movement, this function can be
utilized as functionality control.
Important: Not every encoder type has this functionality
enabled.
Delivered is the serial number of the connected encoder.
The serial number is not enabled for alteration.
The serial number is unique exactly for the connected enco-
der and can be used for traceability.
The serial number is printed on the encoder product label.
Important: Not every encoder type has this functionality
enabled.
Delivered is the article number of the connected encoder.
The article number is not enabled for alteration.
The article number is printed on the encoder product label.
Important: Not every encoder type has this functionality
enabled.
Delivered is the current pulse number per revolution of the
connected encoder.
Note: Encoder types ITD2P and HS35P differentiate bet-
ween channel A and B.
Explanations on functionality
21