Klarstein Survivor 35 Bedienungsanleitung Seite 19

Temperature Setting and gear setting of battery protector (Low voltage
protection)
• Press button once, start setting temperature status.
• Combining to set temperature from -22 °C to 10 °C.
• Press button once again, start exchange status for centigrade degree and
Fahrenheit degree.
• Combining to exchange centigrade degree and Fahrenheit degree.
• Press button once again, start gear setting status for battery protector.
• Combining button to set the gear of battery protector among HI, MED, LO.
• Press button once again, drop out from setting status, setting is already effective or
acknowledged while digital display flash five times after setting.
• Digital display will show the interior temperature of freezer.
Notes:
• Temperature range of the Display is -30-60 °C.
• The keys + and - should be used combining with the SET button. Without pressing
the SET button, pressing + and - or is without function.
• The setup parameters are still effective when the freezer is energized again, it means
that the freezer have power of memory function.
• When the freezer's interior temperature reaches the setup temperature, compressor
stop work. Power indicator light turn to orange color. In switch on status, the colour
of power indicator light shows the compressor status, Green indicates working,
orange indicates stopping.
Turning off the freezer
In working status,press button three seconds continually to turn off the freezer. Pull out
DC cable's cigarette lighter.
Energy-saving tips
• Select a well-ventilated place and keep the fridge away from heat or direct sunlight.
• Cool the hot food before putting into the fridge.
• Reduce the times and lasting time to open the fridge cover.
• Defrost in time when inner frost.
• Setting temperature properly and reduce unnecessary low temperature setting.
EN
19