E - Using The Product Ona Smartphone - avidsen IPC282-MIW Bedienungsanleitung

Motorised 720P WiFi iP caMera
d - CONFigurATiON
4 The calendar allows you to programme
the times the camera is allowed to send an
email when motion is detected. Click to
activate (blue box) or deactivate (white box)
the desired times.
Click on "Alerte
mouvement [Motion detection]":
3 4
1 Motion detection zone: all movements in this
area will trigger an alert.
2 Activation of detection zone 1. Click
to activate motion detection. By
default, zone 1 covers the whole screen.
3 Detection sensitivity for zone 1: When it is set
to the minimum value, only a major change in
the image will trigger an alert. When it is set
to the maximum value, the slightest movement
within the zone will trigger an alert.
4 Zones 2, 3, 4: you can draw other zones on
the screen and give them different sensitivities.
5 IMPORTANT: When you have finished
configuring the device, do not forget to click
on "Sauver [Save]" at the top of the screen to
confirm the entries you have made.
This completes the configuration. From now on, any
motion detected by the camera in the zones and
at the times you have specified will trigger an email
alert.
[Alert]", "Détection
1 2
5
E - uSiNg THE prOduCT ON
A SMArTpHONE
The free application used to control, configure and
view the cameras remotely on your smartphone
de
is available from the Appstore and Google Play.
Download, install and run the "AvidView" app.
Although we have described how the Android app
works here, the same applies to the iPhone.
Launch the application on your smartphone or
tablet, then click on the
"Ajout manuel caméra [Add manual camera]"
at the bottom of the screen, then on the icon
. This will activate the phone's camera so that you
can scan in the QRCode.
Important note: the code scan works more
effectively when the code is positioned above the
red line on the screen.
Next, enter the name you want to give your camera
and its password. Tick the "Mot de passe par
défaut [Default password]" box if you use the
default password (you will be asked to change it
to improve security). The ID for your camera is not
requested here.
icon. Then click on
en
11