D - Configuration; Access To Camera Configuration; Access To All The Settings; Live Video - avidsen IPC282-MIW Bedienungsanleitung

d - CONFigurATiON

1 - ACCESS TO CAMERA CONFIGURATION

The IPCam Search software on the CD provided
(which can also be downloaded from our website,
www.avidsen.com) allows you to detect the IP
cameras on the network. Install and launch IPCam
Search:
This will detect your camera on the network and
show its IP address.
Double-click on its name to open the camera
configuration in your web browser.
Enter the username and password for connecting
to your camera. By default, the username is admin
and the password is admin as well. At the first
connection, the camera will immediately ask you
to replace the default username and password to
improve security.
When you have finished changing the username
and password, you will be asked to log back in.
Your browser will need an additional module to
display the image from your camera correctly and
will ask you if you want to install it. Accept the
request to allow your browser to display the image:
8
en
Motorised 720P WiFi iP caMera
Notes:
• If you do not wish to install the module, the
configuration of your camera will still be accessible,
only the direct view on your computer will be
affected.
• Depending on which browser you are using, the
procedure may differ but the principle remains the
same: you must permanently allow the module to
run if you want your camera to work properly in your
browser.

2 - ACCESS TO ALL THE SETTINGS

2.1 - liVe Video

Once you have logged in with your new username
and password, the camera feed will be displayed:
1 2 3
5 6
1 Language selection
2 Anti-flicker: If the image lighting is artificial,
select 50Hz.
3 Image resolution
4 Access to camera configuration tab
5 Brightness, contrast, and colour settings
6 Orientation settings: allow you to, for
example, flip the image if your camera
is installed upside-down
7 Digital zoom controls
4
7 8 9