What The Lights Mean; Using Your Jabra Sp200 With Two Mobile Devices - Jabra SP200 Handbuch

WHAT THE LIGHTS MEAN

What you see
Flashing blue light
Solid blue
Flashing blue light rapidly
Flashing blue light
Solid green light
Flashing red light
Solid green light when
charging
Solid red light when charging
USING YOUR JABRA SP200 WITH TWO MOBILE
DEVICES
the Jabra SP200 is capable of having two mobile phones (or other
Bluetooth® devices) connected to the speakerphone at the same time .
this will give you the freedom of having only one speakerphone to
operate both of your mobile phones . Please note that Last number
redial will dial the number from the last outgoing call independent of
the mobile phone .
How to pair your Jabra SP200 with 2 Bluetooth® devices:
1 Pair device number 1 with your speakerphone using the
pairing instruction above for re-pairing your speakerphone
(if device 1 is paired to your speakerphone already go to step 2)
2 Press the answer/end button for 4-5 seconds
3 Pair device number 2 with your speakerphone using the same
pairing instruction again
4 Connect to device 1 again
Please note that it is important to connect to device 1 again after
pairing device 2 to ensure connection to both devices .
What it means
Speakerphone is on but not
connected
Connected to phone
Pairing mode
Incoming call
active call
running low on battery
Charging level between 70%
and fully charged
Charging level less than 70%
Jabra SP200
9