Hold (Hold); Checking Remaining Recording Time (Remaining Memory Capacity); Power Save - Olympus VN-180 Gebrauchsanweisung

Hold (HOLD)

1
To conserve battery power, the LCD display disappears when
the recorder is set to the Hold status in the Stop mode.
Checking Remaining Recording Time
(Remaining Memory Capacity)
1

Power Save

When 60 minutes have elapsed in Stop mode, all LCD display
segments go out and the unit enters the Power Save mode.
To exit from the Power Save mode, press any button.
18
1 When the HOLD switch is set to
[HOLD], the recorder is locked
and all buttons are disabled. This
helps to prevent accidental
pressing of buttons that can
activate undesired operations. It
is recommended when carrying
the recorder in a bag or your
pocket.
1 Press and hold the STOP button
in the Stop mode. The LCD
shows the remaining recording
time and remaining battery
power for as long as the button
is pressed.
The LCD also shows the total
number of messages in the
folder.