Herunterladen Inhalt Inhalt Diese Seite drucken

Team ST 27 EC Gebrauchsanleitung Seite 10

Bodenstaubsauger
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
Fax +32 2 359 95 50
UK STYLE PLUG WIRING INSTRUCTIONS (IN THE UK ONLY)
This product must only be used from a 13 amp power socket. If a BS1363 approved 13 amp plug is
used, it should be fitted with a 13 amp fuse. The wires on the power cord are colour coded:
blue = neutral, brown = live, green or green & yellow = earth.
The blue wire must be connected to the terminal marked N or coloured in black.
The brown wire must be connected to the terminal marked L or coloured in red.
The green (& yellow) wire must be connected to the terminal marked E or coloured in green (& yellow).
ASSEMBLING THE VACUUM CLEANER
Always remove the plug from the power socket before fitting or removing accessories.
Fitting the tube: insert the tube into the air intake duct on the top of the appliance and press until
it clicks into position.
Removing the tube: remove the plug from the power socket. To release the tube, press the button
on the end of the tube and pull the tube firmly from the air intake duct.
Fit the telescopic tube both to the handle and the floor brush.
Removing telescopic tube and accessories: to remove the accessories, pull firmly apart.
OPERATION
Pull out a sufficient of length of power cord and insert the plug into the power socket. A yellow
mark on the power cable shows the ideal cable length. Do not extend the cable beyond the red
mark.
Press on the ON/OFF switch to switch the appliance on and off.
To rewind the power cable, press the rewind button with one hand, and guide the cable with
the other hand to ensure that it does not whip causing damage.
It is advisable to set the electronic power regulator to MIN before switching the appliance on.
USING THE CLEANING ACCESSORIES
The large brush is intended for cleaning of floor coverings and hard floors.
When used for the suction of bare floor surfaces, pull out the brush. This can be done by pushing
the switch at the left-hand side of the brush forwards. When pushing the other switch, the brush
is ready for cleaning floor coverings.
The foot switching is easy and quick.
Furniture brush is intended to clean curtains, shelves, books, inlaid furniture, lamps and other
delicate objects.
WHEN CLEANING IS FINISHED
Stop the vacuum cleaner by depressing on the switch button.
Disconnect plug from electrical outlet.
Simply press lightly with your foot on cable rewind button on top of cleaner.
Generated by Unregistered Batch DOC TO PDF Converter
2011.3.804.1511, please register!
Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International
BELGIUM. The page must reproduced and folded in order to
obtain a mini booklet B5 (+/- 150 mm width x 210 mm height).
The page must be folded in order to keep the good numbering
when you turn the page of the I/B . Don‟t change the page
numbering. Keep the languages integrity.
A. Lever for cleaning hard floors.
B.
Lever for cleaning carpets.
Assembly page 10/31
10

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

St 30 h

Inhaltsverzeichnis