Aufbauanleitung Mod. 3111 – 3115, 3129 - 3130 ESG
Assembly instructions Mod. 3111 – 3115, 3129 – 3130
4x
M10 x 708
4x
30 x 10,5
4x M10
1. Mitgeliefertes Montagematerial
fittings
M10 x 708
3. Die Metalladapter auf die runden Haltepunkte
auflegen. Die Gewindestange (M10 x 708)
von Hand eindrehen.
On top of the metal parts place the adapter.
Turn the threaded bolts (M10x708) into the
fixing metal parts, manually.
M10
30 x 10,5
5. Je eine Unterlegscheibe aufstecken und je
eine Mutter aufschrauben.
Lay the shims on the threaded bold and turn
the nuts on them.
3111-3114_3129-3130_ESG.ods
1x
SW17
2. Die Glasplatte umgedreht auf gepolsterte
Montageböcke legen. Die Metall-Grundplatten
zeigen nach oben.
Lay the packed table top with fixing metal
parts upwards on two assembling trestles.
4. Die Metallfüsse auf die Gewindestangen auf-
stecken, so dass sich das geschlossene
Blech oben befindet. Die Metallfüsse mittig
positionieren und dann winklig ausrichten.
Place the legs onto the threaded bolts.
Align legs and glass top (use a bracket).
6. Die Mutter M10 mit Hilfe der mitgelieferten
Stecknuss handfest anziehen.
Fix all with the socket key.
Seite 1 / 2
single pane saftey glass
Tischfuss
table-leg
Winkel
angle bracket
SW17
Erstellt am: 29.01.2014