Axis P33 series Installationsanleitung Seite 12

Page 12
6. Select the power line frequency
from the drop-down list the first time
in your location
network camera is accessed.
Note:
Power line frequency can be changed from Plain Con-
fig or by resetting the product to factory default.
Selecting the wrong frequency will cause image flicker
if the product is used in fluorescent light environments. When using 50 Hz, the maximum frame
rate is limited to 25 fps.
Access the video stream
The Live View page of the network camera is displayed with links to the setup tools which allow
you to customize the camera.
If required, click Yes to install AMC (AXIS Media Control), which allows viewing of the video stream
in Internet Explorer. You will need administrator rights on the computer to do this.
Note:
To install AMC in Windows 7/Windows Vista, you must run Internet Explorer as an administrator.
Right-click the Internet Explorer icon and select Run as administrator.
AXIS P33 Network Camera Installation Guide
(50 Hz or 60 Hz) used