Toshiba RBC-WG1-PE Installationsanweisungen Und Funktionsprofil Seite 15

Default Mode Input
network input
This configuration network variable sets the default mode at power up of each unit
connected to the AI network.
Mode Definition
HVAC_AUTO
HVAC_HEAT
HVAC_COOL
HVAC_FAN_ONLY
Default Value
The default value is HVAC_FAN_ONLY.
Default Setpoint Input
network input
This configuration network variable sets the default setpoint at power up of each unit
connected to the AI network.
Valid range
The valid range is from 18º to 29ºC.
Default Value
The default value is 18ºC.
Default ON/OFF Input
network input
This configuration network variable sets the default at power up for each unit connected to
the AI network to on or off.
UNIT_OFF
UNIT_ON
Default Value
The default value is UNIT_OFF.
®
Windows Gateway – Functional Profile
Input Network Variables
nciDefMode
SNVT_temp_p
nciDefOnOff
Valid range
Input
GB
Valid range
AUTO
HEAT
COOL
FAN
nciDefSetpoint
OFF
ON
15
Operation
Operation