Using The Components; Switching The Components On/Off; Adjusting The Volume - Sennheiser ew 300 IEM G2 Bedienungsanleitung

³ ·
52

Using the components

Switching the components on/off

Switching the transmitter on/off
Press the ON
To switch the transmitter off, press the
the display.
Note:
The transmitter can only be switched off when the standard display is
shown on the display panel. Within the operating menu, the
serves as the ESC (cancel) key, i.e you cancel your entry and return to the
standard display.
Switching the receiver on/off
To switch the receiver on, turn the volume control
clicks. The red LED
To switch the receiver off, turn the volume control
until it clicks. The red LED
Note:
»
The receiver has a short switch-on delay.
Remove the batteries or the accupack when the receiver will not be used
for extended periods of time.

Adjusting the volume

You can adjust the volume at the headphone output on both the transmitter
and the receiver.
Use the volume control
headphones.
Volume up? – NO!
When people use headphones, they tend to choose a higher volume than
with loudspeakers. Listening at high volume levels for long periods can
lead to permanent hearing defects. Please protect your hearing,
Sennheiser headphones have an excellent sound quality even at low
volumes.
button to switch the transmitter on.
lights up.
goes off.
or to adjust the volume of the connected
ON button until "OFF" appears on
clockwise until it
counterclockwise
ON button