Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
device (RCD) in the power circuit, with residual current rating not more than 30 mA.
Contact professional electrician in this matter.
15.
Accessible surface temperatures can be high when the appliance is operating.
Never touch the hot surfaces of the appliance.
16. Due to the high temperature you should be careful when removing the prepared
dishes, removing hot grease or other hot liquids.
presence during use of the appliance.
17.
This electrical appliance contains a heating function. Surfaces, also different than the
functional surfaces, can develop high temperatures. The equipment shall be touch only at
intended handles and gripping surfaces, and use heat protection like gloves or similar.
During or after use, please do not touch the baking tray or the hot area on the shell before
the temperature goes down.
18. The device must cool down before you store it.
19. Do not place products made of cardboard, paper, plastic materials or other flammable
or meltable objects in the device.
20. The device is not designed to work with external schedulers or separate remote control
system.
21.
Do not insert food portions that use whole oven volume, as it may cause fire and
destruction of the device.
22.The power cord may not be placed above the device and it may not touch or be located
near hot surfaces. Do not place the device under a mains socket.
23. Do not move or carry the device during operation. After the operation it can be moved
only if it had enough time for cooling down.
DESCRIPTION OF DEVICE
1. hotplates
3. ready indicator
BEFORE FIRST USE
1. Remove all cartons and labels from housing and from inside (between hotplates).
2. Wipe hotplates first with wet and next with dry damp cloth.
3.
Apply a bit of edible oil or other plant fat to the trays,
4. Keep the appliance running for few minutes to get ride of manufacturing odour. Device could emit some smoke during this time.
That's normal.
5. Clean unit according chapter "Cleaning ".
USING DEVICE
Prepare needed products.
1. Appliance plug in grounded socket - power indicator lamp will light (2).
2. Choose the required time using thermostat knob. Ready indicator will light (3). Wait about 10 minutes. After this time device should
reach required temperature - ready indicator lamp will go off (3).
3. During operation the ready indicator lamp (3) will be turning on and off, that's mean that thermostat keep appropriate temperature of
the hotplates.
4. Operation time is
approximately 10 to 25 minutes
5. Remove the finished products using only wooden or plastic spatula.
ATTENTION! Do not use metal utensils or sharp kitchen tools because they can damage the special non-stick coating heating plates.
6. When finished baking, remove the plug from the outlet and allow the unit to cool down.
CLEANING DEVICE
1.
Unplug the electric plug after use and wait for it to cool down before start cleaning.
Be careful, there can be hot steam
2. power indicator
4. temperature regulator
close and plug in, the power indicator lamp will light (2).
and depends on type of used ingredients and taste preference.
4
Werbung
Inhaltsverzeichnis
