KERN KMB-A01 Betriebsanleitung Seite 9

Network connection:
If your PC is already connected via a switch / hub to the network, no further settings for the
network card in the PC are required.
For a direct connection between Ethernet option and PC via a crosspatch cable comply
with the settings for the Internet Protocol TCP/IP.
You find these settings under Windows via Start-System Control-Network Connections
To select features for the network card, click the right button of your mouse. Under
Internet Protocol TCP/IP Features set options as follows:
Use the following IP-addresses:
IP-address:
Subnet mask :
Standard gateway :
KMB-A01/ FTB-A09 / ITB-A17-IA-defsi-0710
192.168. 1 . 2
255.255.255. 0
. . .
9