Before You Begin - Xerox CopyCentre series Kurzanleitung

Network Connection
Quick Setup Guide
This guide includes instructions for:
■ Navigating Display Screens
■ Network Setup Using DHCP
Network Setup Using a Static IP Address
■
■ Verifying Network Setup Using CentreWare Internet Services (IS)
This setup guide provides instructions for connecting the Xerox WorkCentre M118/M118i on an Ethernet
TCP/IP network. It includes procedures for setting up the network connection using either of the following
methods:
■ DHCP: Use this method to allow a DHCP server to automatically assign an IP address. This is the factory
default setting.
■ Static IP address: Use this method to manually assign an IP address provided by the network
administrator.
Note
The System Administrator Guide provides detailed instructions for setting up a network connection. It also
provides setup procedures if you are using Novell IPX. The System Administrator Guide is located on the
Customer Documentation CD-ROM and on the Xerox website.

Before You Begin

Before turning on the machine:
■ Confirm that an existing operational network utilizing TCP/IP is available.
■ Confirm that the Ethernet cable is plugged into the machine and is connected to an operational Ethernet
port on the network.
Note
The RJ45 Ethernet cable is not supplied by Xerox.
Copyright © 2005, 2004 Xerox Corporation. All rights reserved.
on page 2
on page 2
on page 3
1
Xerox WorkCentre
on page 5
®
M118/M118i