ENG
• If the water tank is used with an extension lead, make sure that the
lead is rated for at least 10A and includes the provision of a protective
earthing conductor. Always take care when using extension leads to
avoid creating a hazard.
• If the supply cord is damaged, it must be replaced by a special cord or
assembly available from the manufacturer or its service agent.
• Always unplug and allow to fully cool before opening the pressure cap
and draining the steamer.
HEALTH ADVICE
Warning! When drilling, sanding, sawing or grinding, dust particles
will be produced. In some instances, depending on the materials you
are working with, this dust can be particularly harmful to you (e.g. lead
from old gloss paint).
You are advised to consider the risks associated with the materials you
are working with and to reduce the risk of exposure. You should:
- Work in a well-ventilated area.
- Work with approved safety equipment, such as those dust masks that
are specially designed to filter microscopic particles.
ELECTRICAL SAFETY
Before switching the product on, make sure that the voltage of your
electricity supply is the same as that indicated on the rating plate. This
product is designed to operate on 230-240V AC 50Hz. Connecting it to
any other power source may cause damage.
4