Worx Landroid Installationsanleitung Seite 8

Marking out landroid's territory
within your garden
Your Landroid needs to know where to mow. This is why you have to mark its working area with a boundary
®
wire that will form an invisible fence. This wire will also guide your Landroid
First of all, locate the best spot for the charging base, taking
into account where your nearest outdoor electricity socket is.
The charging base has a 20m power cord.
note: Make sure the transformer and the electrical socket
are kept in a dry area at all times.
The charging base should be placed along a straight line—allow
8 2 meters at both the front and the back. If possible, place the
charging base in the shade—batteries are better recharged in a
EN
cool place.
Make sure it is on a flat area, clear of any obstacles.
to its charging base.
®
An island is an area that sits inside your lawn where you don't
want Landroid to go. The boundary wire starts from the
®
mowing boundary, goes straight to the island, around it and
back to the boundary as shown by the arrows on the picture.