Dim-Level; Operation Mode; Accessories - Ceag IP65 Montageanleitung Und Bedienungsanleitung

6.3 Dim-Level

Setting the brightness in mainsmode by using the test button
- Push the test-button for t < 1 sec.
- After the first flash of the LED the lightness can be changed by pushing the button again in 3
steps. Every push of the button raises the lightness for 1 step. If the hightest step is reached it
begins again with the lowest.

6.4 Operation mode

printed cir-
cuit board
Position of the switches S1-X:
duration of e.l. no. of LEDs
1h
3h**
**) preset

6.5 Accessories

Wire guard
CEAG No. 400 71 348 370
Operating Instructions
Self contained LED luminaire IP65
6811 1-3/D LED CGLine
Type of luminaire
4 6811 LED CGLine
4 6811 LED CGLine
Switch to
ON „1"/OFF „0"
S1-1 S1-2 S1-3
0 0 0
1 0 0
CEAG Notlichtsysteme GmbH
S1-4
0
0
13