Inhaltsverzeichnis
Werbung
3. Hardware Installation
1.
Locate an area on the ceiling or wall which is capable of supporting the weight of
the camera.
2.
Attach the alignment sticker to the intended location on the ceiling or wall.
3.
Drill three pilot holes where the holes of the alignment sticker are located.
4.
Insert the supplied plastic anchors into the drilled holes, and install "Plate A" with
three screws.
5.
Attach "Plate B" to the bottom of the camera and secure it with two screws.
6.
Slide the Camera into "Plate A"
7.
Secure the camera to the "Plate A" with screw.
D-Link DCS-5615 Quick Install Guide
Plate A
7
Werbung
Inhaltsverzeichnis
