D-Link DCS-5615 Installationsanleitung Seite 11

Click on the D-Link Setup Wizard SE icon that was
created in your Windows Start menu.
Start > D-Link > Setup Wizard SE
The Setup Wizard will appear and display the MAC
Address and IP Address of your camera(s). If you have
a DHCP server on your network, a valid IP Address
will be displayed. If your network does not use a
DHCP server, the network camera's default static IP
192.168.0.20 will be displayed.
Click the Wizard button to continue.
Enter the Admin ID and Password. When logging in
for the first time, the default Admin ID is admin with the
Password left blank.
Click Next, to proceed to the next page.
Select DHCP if your camera obtains an IP address
automatically when it boots up from your router or
DHCP server. Select Static IP if you want to manually
assign IP settings to your camera.
Click Next, to proceed to the next page.
Take a moment to confirm your settings and click Restart.
11
D-Link DCS-5615 Quick Install Guide