Philips HP 375 Bedienungsanleitung Seite 8

Protecting the environment
To remove the built-in rechargeable battery when eventually discarding
the appliance: see fig. 19-25.
• Please note: You can also take the appliance to a Philips Service
Centre. The staff will be happy to help you.
• Before removing the battery should be completely empty of charge. Let
the appliance run until the motor stops.
• Please note: Unscrew the base plate only for battery removal.
The toothbrush may not be watertight anymore after the base plate has
been unscrewed.
For that reason the guarantee is void after opening the toothbrush.
Fitting a different plug
This appliance is fitted with a BS 1363 13 Amp. plug.
Should you need to replace the plug, connect the wires as follows:
Brown wire to the Live (L) terminal of the new plug.
Blue wire to the Neutral (N) terminal of the new plug.
Always fit the same value of fuse as that originally supplied with your
appliance.
Use only BS 1362 approved fuses.
As a guide only: Appliances under 700 W can have a 3 Amp. fuse (red)
and all others should have a 13 Amp. fuse (brown).
When disposing of an old plug (particularly the moulded type which has
been cut from the mains cord) always remove the fuse as the plug could
be dangerous if ever inserted in a live socket.
For U.K. only:
8