Switching On And Temperature Selection; Freezer Compartment; Variable Inner Door; Defrosting - FUST Novamatic EK 69.7-IB Bedienungsanleitung

No mechanical devices or synthetic mate-
I
rials other than those recommended
must be used to accelerate defrosting.
No liability will be accepted for any possi-
I
ble damage if the unit is used for any
other purpose, incorrectly operated, or
not repaired by a professional technician.
In such cases the guarantee and other
liabilities are rendered null and void.
If the connection cable of the unit is
I
damaged it must be replaced by the
manufacturer or by his customer service
or by a similarly qualified person to avo-
id any liability.
Warning: do not operate any electrical-
I
ly-driven devices inside the foodstuff
compartment.

Switching on and temperature selection

(fig. @ )
The temperature controller serves for set-
ting the temperature and switching the
refrigerator on and off.
Important:
The appliance is designed to operate at
room temperatures between +16° and +32°
C. The maintaining of the internal tempera-
tures of the cooling and freezer compart-
ments can no longer be guaranteed at room
temperatures outside this range.
Normal operation
Set the temperature to a position between
the two temperature symbols (warmer top,
colder bottom) according to the desired
cooling compartment temperature. A tem-
perature of -18° C is reached in the free-
zing compartment from a temperature of
5° C or lower in the cooling compartment
(see also Tips). This conditions are satisfied
from an approximately central position of
the controller.
@
Off
Set controller in the direction «0» as far as
the stop. Cooling and lightning are swit-
ched off. To avoid the build-up of odours,
leave the cooling and freezing compart-
ments doors open when the refrigerator is
out of service for long periods.

Freezer compartment

The ***freezer compartment is suited
I
for storage of frozen foodstuffs and for
making ice-cubes.
Products which have been thawed out
I
must not be re-frozen because foodstuffs
can spoil.
Variable inner doors
The cover inserts (Figure &) in the inner doors
can be adjusted somewhat and offer the
option of a customized setting. To change
the location of the inserts and bottle holder:
first lift upwards and lift out, then set the
required height and replace in the reverse
sequence. (fig. ; ).

Defrosting

The refrigerator defrosts automatically. Ice
which has formed on the back wall is mel-
ted (about once per day, see also the tips).
The water flows out of the drainage chan-
31