Mitsubishi Electric PAR-21MAA Installation Seite 21

[Function selection flowchart]
[1] Stop the air conditioner to start remote controller function selection mode. → [2] Select from item 1. → [3] Select from item 2. → [4] Make the setting. (Details are specified in
item 3) → [5] Setting completed. → [6] Change the display to the normal one. (End)
Normal display (Display when
the air condition is not running)
(Hold down the E button and press the D button for two
seconds.)
* The display cannot be changed during the unit function
selection, the test run and the self diagnosis.
Item 1
Press the G button.
Change Language
("CHANGE LANGUAGE")
Press the
→ Operation function limit setting ("LOCKING FUNCTION")
E button.
Function limit
("FUNCTION
Press the
SELECTION")
G button.
Press the Press the
E button. E button.
→ Remote controller main/sub setting ("CONTROLLER MAIN/SUB")
Press the
G button.
Mode selection
("MODE
SELECTION")
Press the
E button.
→ Temperature display °C/°F setting ("TEMP MODE °C/°F")
Press the
Display change G button.
("DISP MODE
SETTING")
Remote Controller Function Se-
lection Mode
Item 2
Use of automatic mode setting ("SELECT AUTO MODE")
Temperature range limit setting ("LIMIT TEMP FUNCTION")
Use of clock setting ("CLOCK")
Timer function setting ("WEEKLY TIMER")
Contact number setting for error situation ("CALL.")
Suction air temperature display setting ("ROOM TEMP DISP SELECT")
Automatic cooling/heating display setting ("AUTO MODE DISP C/H")
(Hold down the E button and press
the D button for two seconds.)
* The remote controller records the
setting that is made in this way.
Press the
Press the G button.
D button.
Press the
D button.
Press the G button.
Press the
D button.
Press the G button.
– 21 –
NOTE
Timer operation stops when the display for
remote controller function selection is
changed to the normal one.
See [4]–1
Dot display
Item 3
The language that is selected in
(Setting content)
CHANGE LANGUAGE mode ap-
pears on this display. English is
See [4]–2. (1)
set in this manual.
See [4]–2. (2)
See [4]–2. (3)
See [4]–3. (1)
F
See [4]–3. (2) TEMP.
MENU
See [4]–3. (3)
E
BACK MONITOR/SET
PAR-21MAA CLOCK
See [4]–3. (4)
G
See [4]–4. (1)
C
See [4]–4. (2)
See [4]–4. (3)
ON/OFF
I
A
ON/OFF
FILTER
DAY CHECK TEST
B
OPERATION
CLEAR
H
D