VESTEL EVC-Serie Installationsanleitung Seite 4

WARNING REGARDING WALL MOUNT
1) Prior to mounting your charging station on the wall, read these instructions.
2) Do not mount your charging station to the ceiling or an inclined wall.
3) Do not mount your charging station in close proximity to heating appliances.
4) Use the wall mounting screws and other accessories specified.
5) This appliance is classified as indoor and outdoor mount compatible.
6) If the device is mounted outside the building, the hardware that will be used to connect the conductors to
the appliance shall be compatible with outdoor use and the appliance shall be mounted preserving the IP
rate of the appliance.
Tools for Mounting:
•(1x) Drill
•(1x) Drill bit Ø8mm
•(1x) Hammer (for dowels)
•(1x) Torkx T25 (Safe) Screw driver
•(1x) PH2/PH3 Phillips Screw driver
•(1x) Flat (Clamp type) Screw driver
•(1x) Water gauge
•(1x) Side Cutter
•(1x) Volt Indicator
English - 2 -