Installation Options - merten 5611 serie Gebrauchsanweisung

The clock can be mounted in two different ways.
• Type of installation: Screws
Use screws if you are mounting the clock
– Onto a rough surface (e.g. wallpaper or roughcast
plaster)
– Onto a flush-mounted box
– Into an M-PLAN real glass frame
• Type of installation: Adhesive strips
Use the adhesive strips only if the surface is smooth
and suitable for mounting with adhesive materials (e.g.
glass or tiles).
How to stick the clock onto the surface
1 Pull out all four corners of the frame using a pair of
pliers (see "Before mounting", on page 14).
2 Affix the adhesive strips
onto the mounting adapter
at the points intended for
them.
3 Clean the surface so that it is free of dust and grease.
4 Press the mounting adapter onto the wall firmly for
about 10 seconds.
16

Installation options

How to screw the clock onto the surface
1 Pull out all four corners of the frame using a pair of
pliers (see "Before mounting", on page 14).
2 Screw the mounting adapter onto
the flush-mounted box or the wall.
3 Press the System M frame onto
the mounting adapter.
4 Insert the clock into the frame and
make sure it clicks into place.
5 Press the System M frame onto
the mounting adapter.
6 Insert the clock into the frame and make sure it clicks
into place.
How to operate the clock
Setting the time and date
The clock is in time/date display mode:
1 Press the "MODE/SET" for about three seconds.
The hour display flashes.
2 Press the "UP" button to set the current hour.
3 Press the "SET" button.
The minutes display flashes.
4 Repeat steps 2 and 3 to set the minutes, the year,
the month and the day one after the other.
5 Press the "END" button to complete the time and date
settings.
The settings are now automatically saved in the clock.
15
17