Operation; Collective Operation Screen - Mitsubishi Electric PAC-SF41SCA Anweisungshandbuch

4. Operation

4-1. Collective operation screen

Collective operation screen
When [ ] is displayed, all groups managed with the system remote controller may be operated collec-
COLLECTIVE
tively as follows.
• ON/OFF for indoor and ventilation units.
• Operating mode for indoor and ventilation units.
• Temperature setting for indoor units.
• Timer operation switching.
• Filter sign reset.
• Disable the local remote controller (only with master settings).
• Setting function for switching limitation of this unit and local remote controller operation modes for each
season.
COL./GROUP
Pressing the switch with operation settings for each group displays the group operation screen.
(The operation mode and the set temperature displays disappear after switching from the group operation
screen to the collective operation screen. If the operation mode switch or temperature setting switch is
used, the details are displayed. Ten minutes after setting is complete, the operation mode and set tempera-
ture display go off. If the operation mode switching limitation is turned on while the operation mode mes-
sage is displayed on this screen, the message disappears.)
8
CENTRALIZED
COLLECTIVE
ON OFF
GROUP
COL./GROUP ON/OFF
MODE
GROUP
SYSTEM
REMOTE CONTROLLER
PAC-SF41SCA
ON/OFF
PROHIBIT
CHECK
ON/OFF MODE
AUTO
FILTER TEMP.
BY-PASS
MODE LOCK
HEAT EX.
SKIP
FILTER
˚C
PROHIBIT
TEMP.
MODE LOCK
FILTER