Icon Explanations; Controller Operation - Mitsubishi Electric Lossnay PZ-61DR-E Bedienungsanleitung

Icon explanations

Controller operation

Timer
The administrator or maintenance user password must be entered
on the password input screen to change settings. There is no
P
settings that can skip this process.
Enter administrator password
Select:
Cursor
F1
Indicates settings that can be
ON
changed only while the units
are in operation.
Indicates settings that can be
changed only while the units
are in night-purge operation.
Timer
F2 F3 F4
Main
P
F1 : Press to move the cursor left.
F2 : Press to move the cursor right.
F3 : Press to decrease the value by 1.
F4 : Press to increase the value by 1.
*Changes cannot be made unless the
correct password is entered.
Indicates setting that can be changed
OFF
only white the units are not in
operataion
Indicates functions that are not
available when the buttons are locked
or the system is centrally controlled.
The table below
summarizes the square
icons used in this manual.
Main
Indicates
settings
that can be
made only
from the
main remote
controller.
11