Husqvarna 115iPT4 Bedienungsanweisung Seite 8

a) The product is on when the LED is on.
b) The product is off when the LED is off.
To start the SavE function on page 13 for
2. Refer to
the function of the SavE button (B).
Troubleshooting on page 20 if the warning
3. Refer to
indicator (C) is on or flashes.
To do a check of the power trigger lockout
The power trigger lockout prevents accidental operation.
When you push the lock (A), it releases the power
trigger (B). When you release the handle, the power
trigger and the power trigger lockout move back to their
initial position.
1. Make sure that the power trigger is locked when the
lock is in its initial position.
2. Push the power trigger and make sure that it moves
back to its initial position when you release it.
8
A
B
3. Make sure that the power trigger and the lock moves
freely and that the return spring operates correctly.
4. Start the product, see
13 .
5. Apply full speed.
6. Release the power trigger and make sure that the
cutting attachment stops fully.
Safety instructions for the cutting equipment
WARNING: Read the warning instructions
that follow before you use the product.
• Only use the guide bar/saw chain combinations and
filing equipment that we recommend. Refer to
Maintenance on page 14 for instructions.
• Use protective gloves when you use or do
maintenance on the saw chain. A saw chain that
does not move can also cause injuries.
• Keep the cutting teeth correctly sharpened. Obey the
instructions and use the recommended file gauge. A
saw chain that is damaged or incorrectly sharpened
increases the risk of accidents.
• Keep the correct depth gauge setting. Obey the
instructions and use the recommended depth gauge
setting. Too large depth gauge setting increases the
risk of kickback.
• Make sure that the saw chain has the correct
tension. If the saw chain is not tight against the guide
bar, the saw chain can derail. An incorrect saw chain
tension increases wear on the guide bar, saw chain
To start the product on page
707 - 003 - 04.03.2019