Start-Up; Teaching-In - HomeMatic IP HMIP-SWDO-I Montage- Und Bedienungsanleitung

Start-up

5 Start-up
5.1

Teaching-in

Please read this entire section before
starting the teach-in procedure.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
To integrate the window / door contact into your system
and enable it to communicate with other Homematic IP
devices, you must teach-in the device to your
Homematic IP Access Point first.
To teach-in the window / door contact, please proceed
as follows:
• Open the Homematic IP app on your smart-
phone.
Select the menu item "Teach-in device".
•
Open the battery compartment (E). Press the
•
latch of the cover (D) downwards and pull down
the cover afterwards (see fig. 2).
• Remove the insulation strip from the battery
compartment of the window / door contact.
• Pairing mode remains activated for 3 minutes.
32