Function And Device Overview - HomeMatic IP HMIP-SWDO-I Montage- Und Bedienungsanleitung

Function and device overview

3 Function and device overview
The Homematic IP Window / Door contact – invisible
installation reliably detects open and closed windows and
doors by an integrated infrared-sensor.
The device is easily mounted on the inside of the window
or door frame using the supplied adhesive strips and is no
longer visible if the window or door is closed.
The window and door contact offers a wide variety of
applications in the Homematic IP system. The room
temperature is reduced during ventilation in connection
with a Homematic IP Radiator Thermostat. Furthermore,
the device can be used for security applications and
monitor the building envelope.
Open windows and doors are directly displayed in the
Homematic IP app. Even while being out and about you
can keep a close eye to your windows and doors.
Thanks to the integrated tamper contact you are
immediately informed via the app about manipulations
on the window and door contact.
Using the device for any purpose other than that
described in this operating manual does not fall
within the scope of intended use and shall
invalidate any warranty or liability.
30