Technische Daten - Ecler ALMAcard Bedienungsanleitung

8. TECHNICAL CHARACTERISTICS
8. CARACTÉRISTIQUES TECHNIQUES
HARDWARE (ALMAcard)
Processing
A/D & D/A
DSP
Latency
Input / Output
Input Levels: Nominal / Maximum
Input attenuator
Input Impedance
Stack Output impedance
CMRR (20Hz - 20kHz)
THD + NOISE
Output Noise Floor (FFT)
Frequency Response (-0.3dB)
Crosstalk (20Hz-20kHz)
Maximum Input Delay
Maximum Output Delay
Delay resolution
Compressor / Limiter
Threshold
Ratio
Attack time
Release time
High & Low pass Crossover filters
Parametric EQ
Type
Gain
Frequency
Built In signal generator
Signal Mute
Signal Polarity Invert
Analog Volume remote control (0-10VDC)
Connectivity
Dimensions
Weight
8. CARACTERÍSTICAS TÉCNICAS

8. TECHNISCHE DATEN

Measuring ALMAcard as a independent device
24 bit, 48kHz
32/64 bits
1ms
2 Inputs (internal) / 4 outputs (2 internal & 2 external)
0dBV / +12dBV
from -∞dB to 0dB
>20kΩ electronically balanced,
300Ω electronically balanced
> 55dB
< 0.0028% (1KHz, 1Vrms)
< -110dB (from 20Hz to 20KHz)
10Hz - 20kHz
better than -60dB CH1 to CH2 & Stack1 to Stack2
1s (343.4m) for each channel
1s (343.4m) for each channel
20.83µs (7mm)
from -36dBV to +12dBV
to ∞:1 (limiter)
1:1
Auto or from 0.1ms to 500ms.
Auto or from 1ms to 5s.
Butterworth 6 / 12 / 18 / 24 / 48 dB/oct.
Bessel 12 / 18 / 24 / 48 dB/oct
Linkwitz-Riley 12 / 24 / 48 dB/oct.
4 max. per input / 8 max. per output / Bypass
Parametric EQ: Q: 0.3 to 200
Low & High Shelf 6/12 dB/oct
Low & High Pass 6/12 dB/oct
-60dB ~ +12dB step 0.1dB
20Hz ÷ 20kHz
Sine (20Hz to 20kHz)
Polarity(20Hz to 20kHz)
White Noise
Pink Noise
Yes
Yes
0V = no attenuation (0dB)
+10V = full attenuation ( -∞ )
USB2.0 Full Speed compatible
Can provide supply to the ALMAcard while programming
software ECLERCOMM Manager
143x75x30mm
230g.
65