Safety Precautions - Panasonic TY-WK42PV4W Anleitung Zur Anbringung

Safety precautions

WARNING
Ensure that the installation location is strong enough to support long-term use.
• If its strength becomes insufficient over the course of long-term use, the plasma TV may drop, possibly
causing injury.
Fitting work and connection equipment expansion should never be done by any other than a qualified
installation specialist.
• Incorrect fitting may cause equipment to fall, resulting in injury.
Include a safety factor when considering the strength of the proposed fitting location.
• If strength is not sufficient the equipment may fall, resulting in injury.
When expanding connection equipment, be sure to prevent lock release. (See page 5 step-5)
• This may cause injury.
Do not fit at a location that cannot bear the load.
• If the fitting location lacks sufficient strength the equipment may fall.
Do not disassemble or modify the wall-hanging bracket.
• Otherwise the unit may be dropped and become damaged, and personal injury may result.
CAUTION
Do not use any television and displays other than those given in the catalogue.
• Otherwise the unit may be dropped and become damaged, and personal injury may result.
Do not fit at any locations subject to humidity, dust, smoke, steam or heat.
• This may have an adverse effect on the plasma TV and cause fire or electric shock.
The work of fitting or removing the plasma TV must be performed by at least two people.
• The plasma TV may fall and cause injury.
Do not fit facing upwards, sideways or upside down.
• This may cause heat to build up inside the plasma TV unit, resulting in a fire.
Provide spacing around the plasma TV of at least 10 cm to the top and right side, at least 30 cm to the left
side, at least 6 cm to the bottom, leave a clearance between the rear panel and the wall.
• The plasma TV unit has air blow holes on the top, and air suction holes on the bottom and rear. Covering these
may result in a fire.
Install the plasma TV by taking only the steps which are specified in these instructions: Do not install it in
any other way.
• Otherwise the unit may be dropped and become damaged, and personal injury may result.
Install the mounting screws and power cable in such a way that they will not make contact with the inside
parts of the wall.
• Electric shocks may result from contact with any metal objects inside the wall.
For installation, use the special-purpose constituent parts.
• Otherwise, the plasma TV may fall off the wall, possibly causing injury.
Remove the product that will not be used any longer.
• Otherwise the product may fall down and personal injury may result.
Requests regarding handling
1) Exercise care when selecting the location for the TV because it may discolor or deform due to light or heat if it
is placed where it is exposed to direct sunlight, or near a heater.
2) For cleaning, wipe the display using a soft dry cloth (made of cotton or flannel). If the unit is particularly dirty,
clean it using a cloth soaked with water to which a small amount of neutral detergent has been added, and
then wipe with a dry cloth. Do not use products such as solvents, thinner or household wax for cleaning, as
they can damage the surface coating. (If using a chemically-treated cloth, follow the instructions supplied with
the cloth.)
3) Do not affix adhesive tape or stickers to the product. Doing so may dirty the surface of the wall-hanging
bracket. Do not allow long-term contact with rubber, vinyl products or the like. (Doing so will cause
deterioration.)
4) Take care during installation as shocks can cause 'panel cracks' to the plasma television unit.
Caution:
This bracket is intended for only Panasonic plasma TV models (See page 46, 47).
Use with other apparatus is capable of resulting in instability causing possible injury.
PROFESSIONAL INSTALLATION IS REQUIRED.
PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING DEATH
RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING.
2 2