Pioneer SE-MS9BN Bedienungsanleitung Seite 17

4. Pairing
Pairing must be performed before the headphones can be used to listen to music
or communicate using a Bluetooth device.
For further details regarding the pairing procedure, consult the user's manual for
your Bluetooth device.
(1) While the power of the unit is off, hold down the (
unit enters pairing mode.
• The pairing mode is confirmed by the LED indicator's alternately flashing blue
and red.
Release the ( ) button after confirming that the LED indicator is alternately
lighting blue and red.
• When in the pairing mode, if pairing is not completed within about 5 minutes,
the power will automatically turn off.
(2) Turn on the power to the Bluetooth
begin pairing; search for this unit (wireless headphones) from the paired
Bluetooth device.
• Set the Bluetooth device close (within one meter) to the wireless headphones.
• These wireless headphones will appear in the Bluetooth device's display as
"SE-MS9BN".
(3) Confirm that pairing has been successfully completed with the
device.
• Look at the display for the Bluetooth-enabled device and select "SE-MS9BN".
• When the LED lamp is flashing in blue slowly about once every 3 seconds, pair-
ing is complete. When it is flashing quickly about once every second, pairing is
not complete.
• The PIN code for these wireless headphones has been factory set at "0000".
Input this code if requested by the Bluetooth device.
Connect to the Bluetooth device
• Confirm that the power to the wireless headphones is ON before connecting to
the Bluetooth device.
• Depending on the device, connection between the wireless headphones and
Bluetooth device may be effected automatically after pairing.
Disconnecting from the Bluetooth device
• Hold down the ( ) button until the flashing LED lamp turns off and the power of
the device turns off.
) button until the
device you wish to pair with, and
Bluetooth
Note
• Depending on the device connected, the A2DP profile may need to be des-
ignated when playing music, and the HFP or HSP profiles for hands-free
communication.
• For details regarding operating and setting methods, consult the user's manual
for the Bluetooth device.
• When a connection with the device becomes no longer possible, perform paring
again.
• These wireless headphones can record pairing information for up to 8 Bluetooth
devices. If pairing is performed for a ninth device, the information for the first
paired device will be overwritten and lost. If you wish to reconnect to that device
on a subsequent occasions, it will be necessary to repeat pairing with that
device.
• Whenever using a device with which pairing has been performed, first turn on
the power to the wireless headphones, then perform the connection operation
for the paired Bluetooth device.
4
En