OEG KSW series Bedienungsanleitung Seite 34

Consider storage tank
S2.10
temp. 1
S2.11 Consider storage tank
temp. 2
Consider storage tank
S2.12
temp. 3
S2.13 Min. collector temp.
Min. temp. of aux. heat
S2.14
source Q1
S2.15 Min. temp. of aux. heat
source Q2
S2.16 Actuator speed
S2.17 Regulation constant of the
mixing valve
Service settings manual
We define whether storage tank 1 should be loaded (by
means of collectors) only to the set point temperature.
We define whether storage tank 2 should be loaded (by
means of collectors) only to the set point temperature.
With settings we define whether storage tank 3 should be
loaded (by means of collectors) only to the set point tempe-
rature.
We define whether and how the minimum collector tempe-
rature is considered.
We define whether and how the minimum temperature of
auxiliary heat source Q1 is considered.
We define whether and how the minimum temperature of
auxiliary heat source Q2 is considered.
Actuator running time, needed for a 90° turn. This data is
considered at delayed switchovers with mixing valves.
This setting is PI constant for 3 - point control of mixing
valve.
34
0 - no
1
1 - yes
0 - no 1
1 - yes
0 - no
1
1 - yes
0 - no
2
1 - yes
2 - yes, only for
switch-on
0 - no
1
1 - yes
2 - yes, only for
switch -on
0 - no 1
1 - yes
2 - yes, only for
switch-on
1 ÷ 8 min 2
25
15 ÷ 60 s