Operation Mode Selection - OEG KSW series Bedienungsanleitung

OPERATION MODE SELECTION

In group "OPERATION MODE" select the required controller operation mode. You can select
between automatic mode, automatic mode according to the program timer, manual mode
and controller switch-off.
You choose the required mode by pressing buttons
ing button .
You exit the setting by pressing button
Description of operation mode:
Automatic mode without time program
Automatic mode according to the program timer
Program timer has no influence on heating with solar collectors.
Manual mode
This mode is used for testing the heating system or in case of a malfunction.
Every output can be manually activated or deactivated.
For manual control of outputs, select the icon
manual mode is already selected.
Controller switch-off
Controller is not performing system control and switches off all outputs.
All temperatures are still measured and shown.
User and settings manual
,
.
By pressing buttons
move among particular outputs R1-R3.
We select the output whose state we want
to change by pressing button
ON or OFF starts to flash.
Now you can change the output state by
pressing buttons
firm it with button
By pressing the button
20
and confirm it by press-
, or .
once again when the
and
. Value
, and con-
.
we exit settings.
we