Operating Functions - Lightmaxx FLAT PAR TRI Bedienungsanleitung

5 channel mode
Channel Value
1 000-255
2 000-255
3 000-255
4 000-255
000
001-005
5
006-010
011-255

Operating functions:

The device contains automatic programs that run according to fixed schemes (Auto) or are
recalled via the built-in microphone to match the music (Sound). The selection of the respective
mode takes place via the menu directly on the device.
If you connect several devices of the same type via DMX, they can be controlled simultaneously
via the master device. To do this, set the desired function "Master" on the first device of the line,
the other devices of the series must now be set as "Slave". Now the first device of the line gives
the function to all other devices and all devices run simultaneously.
Remote control:
The device can be controlled via the remote control included in the scope of delivery. The
respective functions can be performed using the various program selection or color keys.
BLACKOUT: LED off
SPR: Built-in programs. All 21 programs can be switched through via +/-.
FL: Strobe function. With +/- the speed can be changed.
SP: Speed control of a program. With +/- speed can be changed.
D: DMX mode
SA: Sound active
SL: Master/Slave mode
S: Setting a DMX address via keys 0-9
R(RED), G(GREEN), B(BLUE), W(WHITE)
Fixed static colors, via "-+" the intensity can be adjusted
For example, to set DMX address 245, proceed as follows:
Press the "S" button on the remote control.
Then press buttons 2, 4 and 5. Done.
Now you have set the address 245 via remote control.
Function
Red
Green
Blue
Master dimmer
ON
Sound
Dimmer
Strobe
ENGLISH