Hama 00053145 Bedienungsanleitung Seite 17

d Bedienungsanleitung
Driver installation for an existing Windows installation:
For Windows Vista and 7 (32-bit):
1. First install the hardware as described in this manual and
start up Windows.
2. After the operating system has started up, a window
appears with the title "Found New Hardware". It offers
you three options. Choose the option "Locate and install
driver software (recommended)".
3. You may be asked by User Account Control to allow this
action. Simply click → Next.
4. Windows automatically tries to find a suitable driver for
the controller on the Windows Online website. If no driver is
available, you must use the enclosed driver CD-ROM.
5. You will then be requested to insert the storage device for
the RAID controller. Do not comply with the request.
Instead, click the option "The device is not available.
Display other options."
6. In the next step, select the option "Browse my computer for
driver software (advanced)".
7. Now insert the enclosed driver CD-ROM.
8. Now enter the following data in the entry field: E:\Treiber\
Vista_7\32Bit (if necessary, replace E with the letter
assigned to your disk drive). Click → Next.
9. The Hardware Wizard installs the driver from the path you
have specified and then informs you that the installation has
been completed successfully.
10. Restart the operating system in order to proceed with setting
up the hard drives under Windows Vista or 7.
You can check whether the controller has been installed
properly by selecting Start (Windows logo) → Control Panel
→ System and Maintenance (Vista) or System and Security
(Windows 7) → Device Manager. Under some circumstances,
User Access Control may ask you to approve this action. Simply
click → Next. The following entry must appear without a yellow
exclamation mark.
Storage controllers:
• JMicron JMB36X controller
Note: We highly recommend that Windows Vista users
install Service Pack 2 due to enhancements and improved
functionality.
For Windows Vista and 7 in the 64-bit version:
1. First install the hardware as described in this manual and
start up Windows.
2. After the operating system has started up, a window
appears with the title "Found New Hardware". It offers
you three options. Choose the option "Locate and install
driver software (recommended)".
3. You may be asked by User Account Control to allow this
action. Simply click → Next.
4. Windows automatically tries to find a suitable driver for
the controller on the Windows Online website.
16
If no driver is available, you must use the enclosed driver
CD-ROM.
5. You will then be requested to insert the storage device for
the RAID controller. Do not comply with the request.
Instead, click the option "The device is not available.
Display other options."
6. In the next step, select the option "Browse my computer for
driver software (advanced)".
7. Now insert the enclosed driver CD-ROM.
8. Now enter the following data in the entry field: E:\Treiber\
Vista_7\64Bit (if necessary, replace E with the letter
assigned to your disk drive). Click → Next.
9. The Hardware Wizard installs the driver from the path you
have specified and then informs you that the installation has
been completed successfully.
10. Restart the operating system in order to proceed with setting
up the hard drives under Windows Vista or 7.
Note: We highly recommend that Windows Vista users
install Service Pack 2 due to enhancements and improved
functionality.
For Windows XP Home / Professional or Media Center
1. First install the hardware as described in this manual and
start up Windows.
2. As soon as Windows has booted up, the Add Hardware
Wizard appears and asks you whether Windows can
connect to the Internet to search for a suitable driver with
Windows Update. Select the option → "No, not this time"
and click → Next to continue installation.
3. Next, you will be asked to insert a floppy disk or CD so that
you can install the driver. When you have inserted the
enclosed CD, select the second of the two options:
"Install software from a list or particular source (for
advanced users)". Click → Next. (If the autostart menu of
the Hama CD-ROM is displayed first, exit it.)
4. In the next step, "Select search and installation options",
select the following options:
• Search for the best driver in these locations
• Include this location in the search:
Enter the save location for the driver in the active entry field.