Werbung
Verfügbare Sprachen
Verfügbare Sprachen
g Operating Instruction
For Windows Vista and 7 in the 64-bit version:
1. Insert the enclosed driver CD-ROM into your drive.
2. Have a USB memory stick or a newly formatted floppy disk
ready.
3. Insert the USB memory stick into a free USB port or insert
the formatted floppy disk. Copy all the contents of the
directory Treiber\Vista_7\64Bit\Floppy from the enclosed
driver CD-ROM onto the USB memory stick or the floppy
disk.
4. Once the copying process has been successfully completed,
begin installing your operating system, as described in these
instructions.
5. In order that the operating system can be installed on
the hard drive, you must install the required driver during
the Windows installation. In the Windows setup program,
when asked "Where do you want to install Windows?",
click on the option "Load driver".
6. Follow the instructions of the installation program and, if you
have not already done so, insert the USB memory stick in a
free USB port or insert the floppy disk and click → OK.
7. The Windows installation program searches the USB
memory stick or floppy disk for a suitable driver and within a
short time displays it (JMicron JMB36X Controller).
Click → Next.
8. Now set up the hard drive or RAID array as required. Then
continue following the instructions of the Windows setup
program until Windows installation is complete.
For Windows XP x64-bit version:
1. Insert the enclosed driver CD-ROM into your drive.
2. Have a newly formatted floppy disk ready.
3. Insert the floppy disk into your floppy disk drive and copy all
the contents of the directory Treiber\XP\64Bit\Floppy from
the enclosed driver CD-ROM onto the floppy disk.
4. Once the copying process has been successfully completed,
begin installing Windows XP.
5. During the Windows XP setup program, press F6 as soon as
the following message is displayed at the bottom of the
screen. "Press F6 if you need to install a third party SCSI or
RAID driver..."
6. Insert the previously created floppy disk with the driver into
your floppy-disk drive and press ENTER.
7. In the Windows setup screen, press the S key to load the
driver from the floppy disk.
8. Select the correct driver using the up and down arrow keys.
In our case, the correct driver is called "
(Windows XP/2003 x64) RAID/AHCI Driver for Jmicron
JMB36X Controller". Then press ENTER.
9. The driver has been loaded from the floppy disk. The
installed driver is displayed for verification:
"(Windows XP/2003 x64) RAID/AHCI Driver for Jmicron
JMB36X Controller". Press ENTER to confirm.
10. Then follow the instructions of the operating system in order
to complete the installation of Windows XP x64.
For Windows XP Home/Professional/Media Center 2005:
1. Insert the enclosed driver CD-ROM into your drive.
2. Have a newly formatted floppy disk ready.
3. Insert the floppy disk into your floppy disk drive and copy all
the contents of the directory Treiber\XP\32Bit\Floppy from
the enclosed driver CD-ROM onto the floppy disk.
4. Once the copying process has been successfully completed,
begin installing Windows XP.
5. During the Windows XP setup program, press F6 as soon as
the following message is displayed at the bottom of the
screen. "Press F6 if you need to install a third party SCSI or
RAID driver..."
6. Insert the previously created floppy disk with the driver into
your floppy-disk drive and press ENTER.
7. In the Windows setup screen, press the Z button to load the
driver from the floppy disk.
8. Select the correct driver using the up and down arrow keys.
In our case, the correct driver is called "(Windows XP/2003)
RAID/AHCI Driver for Jmicron JMB36X Controller". Then
press ENTER.
9. The driver has been loaded from the floppy disk. The
installed driver is displayed for verification:
"(Windows XP/2003 x64) RAID/AHCI Driver for Jmicron
JMB36X Controller". Press ENTER to confirm.
10. Then follow the instructions of the operating system in order
to complete the installation of Windows XP.
15
Werbung
