Installer Options - Eberle E100 Bedienungs- Und Installationsanleitung

3 Installer Options

The following installer options can be adjusted,
1.Application Type
2. System Capability
3. Control algorithm
To enter the 'Installer' menu
Press and hold the 'Off & +' buttons for more than 5 seconds – the
display will show 'Inst' (Installer menu) as shown.
To return to normal operation
Press and hold the 'Off & +' buttons for more than 5 seconds or wait
for 1 minute and it will return automatically.
3.1 Application Type (Effective only for PID (PWM))
• Press the 'On' button until 'Ap:ty' (Application Type) is shown, with
the current setting.
• Press the "+" or "–" buttons to select between,
9 = Gas Boiler
0 = Oil Boiler
E = Electric Heat
Once a value has been changed, press 'On' to accept the modification.
Off On
Off On
31