Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3
Installation, Handling and Initial Operation
3.1
Scope of delivery
Please check whether the delivery is complete and whether all parts are free from transport
damage. Immediately inform us or the distributor about missing parts or transport damage.
The EL 3 consists of:
1 light-curing unit egger EL 3 (230 V)
1 light-curing unit egger EL 3 (115 V)
1 instruction and processing manual
Furthermore, we can offer a variety of devices and useful accessories from our wide range of
products such as:
•
modeling pastes, lacquers and accessories
•
cutters, drills und tools
•
technique units
•
compressors for compressed air
•
compressed-air sprays
3.2
Technical data of the light-curing unit egger EL 3
Power supply:
Mains frequency:
Connection:
Power input:
3.3
Spare parts and accessories for the light-curing unit egger EL 3
UVA light bulb
Reflecting foil set
3.4
Assembling and connecting the unit
The electrical light-curing unit egger EL 3 corresponds to the state-of-the-art standards and to
the acknowledged safety regulations, nevertheless dangers can arise. Please observe the fol-
lowing, before putting the unit into operation:
•
Qualified and trained persons must use the device only.
•
Please adhere to the acknowledged safety regulations.
•
Use the unit in perfect and clean conditions only and by observing the operating
manual.
•
Put the device horizontally and place it in its suitable working position.
•
Before putting the device into operation, the user has to read the operating manual
and ask the manufacturer in case of any questions.
•
Protect the unit against abrasion.
•
Check whether the unit is dry.
•
Check whether the device is in technically perfect condition, especially the mains
cable!
•
Plug in the mains cable.
230 V +/- 10 % (or 115 V )
AC 50 Hz
mains plug Schuko (German) (or US)
30 W
REF 51300
REF 51310
REF 50103
REF 51301
or
Werbung
Kapitel
Inhaltsverzeichnis
