Installation and Operating Instructions
RW 7511
1
General
Basically the main parts of the installation and operating instructions with part no. 15970832-EU/0833-EU (ABS submersible mixer RW) are also
valid for RW 7511. This also applies if the RW 7511 model Ex is connected correctly and operated in safe mode. Same applies for the Safety
instructions. These are included in the separate booklet 1 597 0799 and have to be studied carefully before installation and commisioning!
These "additional" installation and operating instructions for ABS submersible mixer RW 7511 contain only cross-references e.g.
the differing, additional and product specific information.
1.1 - 1.3
Introduction; Corrects usage of the product; Application restrictions
See chapter 1.1 - 1.3 of the Installation and Operating Instructions 15970832-EU/0833-EU.
1.4
Application areas
The submersible mixer RW 7511 is used for mixing, stirring and agitating of viscous fluids containing solids in sewage treatment plants,
industry as well as agriculture. It is specifically designed for the major mixing fuctions during homogenization of sludge and coenzymes.
1.5
Identification code
See chapter 1.5 of the Installation and Operating Instructions 15970832-EU/0833-EU. *Propeller type = 2-blade special propeller for
sludge and coenzymes.
1.6
Technical data
See chapter 1.6 of the Installation and Operating Instructions 15970832-EU/0833-EU.
1.6.1
Technical data RW 7511, 50 Hz
[mm]
[1/min]
RW 7511
750
285
1.6.2
Technical data RW 7511, 60 Hz
RW 7511
750
285
P
= Power input ; P
= Power output
1
2
1 = Propeller speed with gear ratio i=6; 2= Propeller speed with gear ratio i=5
● = Standard ; ○ = Option; ●* =Moisture ingress monitor in connection chamber instead of oil chamber
**Cable type: 10 m cable with free ends as standard: 1 = 1 x 7G x 1.5 ; 2 = 1 x 10G x 1.5 ; 3 = 1 x 10 x G x 2.5 ; 4 = 2 x 4G x 4 + 2 x 0,75
1.7
Dimensions and weights
See chapter 1.7 of the Installation and Operating Instructions 15970832-EU/0833-EU.
1.7.1
Dimensions RW 7511
1158
[45,6]
100 x 100
[ 4,0 x 4,0]
GB 1581-C
[kW]
[kW]
A 150/4
17.8
15.0
2
A 130/4
15.3
13.0
1
198
[7,8]
447
[17,6]
Figure 1 Dimensions RW 7511
[A]
[A]
●
31.3
172
4
●
21.8
109
4
100 x 100
[ 4,0 x 4,0]
98
[3,9]
1066
[42]
●
●
○
●
●
●
●
Ø740
[29,1]
mm
[inch]
[kg]
202
202
5