Safety Hints - Dorr DAF-320 Bedienungsanleitung

Thank you for choosing this DÖRR product.
Please read the instruction manual and safety hints carefully before first use. Keep this instruction manual together with the device.

SAFETY HINTS

- Do not use or touch the device kit with wet hands.
- If the device is not in use for a longer period, please remove the batteries.
- Protect the device from rain, moisture and extreme temperatures.
- Do not use the device if it has been dropped. In this case a qualified electrician
should inspect the device before you use it again.
- If the device is damaged or if you notice a burnt smell: Interrupt the electronic
power supply by removing the batteries. Do not attempt to repair the device by
yourself. When service or repair is required, contact qualified service personnel.
- Never use aggressive cleansing agents or benzine to clean the device. We
recommend a soft microfiber cloth to clean the outer parts of the device.
- Store the device in a dust-free, dry and cool place.
- Keep away from children.
- DÖRR is not liable for damages caused by improper use or the failure to
observe the safety hints.
INTRODUCTION
The DÖRR DAF-320 is a system flash, which harmonizes with the functions of your Sony DSLR or system camera. Our intension is that by using the DAF-
320 you will achieve much better image results than with the use of the built-in camera flash or without flash. For an optimum use of the functions of your
new flash unit, please read these instructions before starting to work with the flash.
KEY FEATURES OF THE DÖRR DAF-320
• TTL Flash Control – the required flash power is calculated and set
automatically. Perfectly illuminated pictures are guaranteed.
• +/- Correction - for adaption to difficult light conditions
• Powerful Flash – guide no. 32; the flash ranges up to 15m (at ISO 400
and aperture setting F4.0)
• Manuel Power Setting– of great advantage for complex or creative
picture composing
• Flash Head can be bounced and tilted – for indirect flash ensuring
softer light characteristics
• LED Modelling Light – ensures precise autofocus even at low
ambient light
• Slave Mode – for wireless and external use of the DAF-320 flash unit
• Sleep Function – auto power saving mode
• Stable Flash Foot – partly made of metal
• Overheating Protection
• LCD – displays all settings
GB INSTRUCTIONS FOR DÖRR DAF-320 TTL FLASH SONY MIS
BATTERY HINTS
Only use high-quality batteries of popular brands. When inserting the batteries,
please note correct polarity. Do not insert batteries of different types. Please
remove batteries when device is not in use for a longer period. Do not charge the
batteries - risk of explosion! In case of contact with battery acid rinse the affected
area immediately with water and contact a doctor. Do not dispose of batteries in
household waste.
NOMENCLATURE
1 Main & Assist Light Switch
2 LC display
3 C2
4 Arrow key right
SET button
5
Clamp collar
6
7 Arrow key left
8 Flash ready indicator
9 MODE button
10 C1 button
11 Button for test flash and
strobe modelling light
2
12 Flash head
13 LED modelling light
14 Battery compartment
15 Unlock key for battery compartment
Locking pin
16
USB charging socket
17
18 Flash contacts
19 Wireless sensor