Danfoss RET2000 B Installationsanleitung Seite 11

Locking and Limiting
The RET2000 has an Advance Programming Mode in order to set
up temperature lock and limit settings.
• Press the V button when in heat mode or Λ button when in
cool mode until the standby mode is reached.
• The Λ button or V button should then be released and then
pressed and held for a further 5 seconds to enter the Advanced
Programming Mode.
• To indicate that the unit is in Advanced Programming Mode
the Standby Indicator will fl ash and the display will show the
setting number alternating with the current value for that
setting.
• To change the setting press either the Λ or V button.
Danfoss Heating
GB GB
DE
DK
ES
FR
NL
RU
TR
11