Lever Use-Using Index Plungers; Using The Index Plungers (Locking Variety Only); Serial Number Location; Serial Number - Zippie Neptune Gebrauchsanweisung

5.0 Lever Use-Using Index Plungers

Using The Index Plungers
To place the plungers in an open position, (Fig.5.1-5.3):
• Pull out the plungers to maximum tension (B).
• Turn the plungers a half turn anti-clockwise (C) This places
them in an open position.
• To close - Turn the plungers a half turn clockwise and they
should snap back into a locked position (A).
Fig.5.1
A
LOCKED
Fig 5.3
C
OPEN

6.0 Serial Number Location

Serial Number

The serial number, (A), is located at the rear of the seat beneath
the seat cushion, (Fig.6.1).
NOTE: You will need to pull the seat cushion up releasing it from
the poppers at either side, (Fig.6.1).
Fig.6.1
Neptune Rev.2.0
(locking Variety Only)
Fig.5.2
B
PULL

7.0 Lap Strap Fixing Location

DANGER!
Incorrect fitting of lap straps can put the user at serious risk.
The Neptune is fitted with buckles as standard which can be
utilised for either 2 or 4 point lap belts. The primary fittings (A)
are loacted on either side at the back of the chair. The
secondary fittings (B) are located either side at the front on the
underside of the chair, (Fig7.1-7.2).
Fig.7.1
Fig.7.2
A
A
A
B
11