Operation; General; Power On/Off; Battery Low Indication - laerdal Heartsim 200 Gebrauchsanweisung

HS 200 DfU 02-15EN.qxd

4.1 General

4.1.1 Power On/Off

To switch on the Heartsim 200, simply press the On/Off key.
To switch off the Heartsim 200, press the On/Off key a second time.
To conserve battery power, the Heartsim 200 automatically
switches off after approximately 10 minutes if there has been
no user activity.

4.1.2 Battery Low Indication

The yellow Battery low LED switches on to indicate that battery
power is low and that the batteries should be replaced. See
section 5.2.1 for battery removal/replacement. The Heartsim 200
will operate after the battery low LED is lit, but when the battery
voltage is too low, the unit will switch automatically off.
Note: The amplitude of the ECG and pulse strength may be
affected when the Battery low LED is lit.
6
12.11.03 13:25
4 . O p e r a t i o n
HEARTSI M
HEARTSI M
Sinus VTslow VTfast
Sin.Brad Sin.Tach Torsade
1°AVB 2°AVB#1 2°AVB#2
Unif.PVC Multif.PVC Coupl.PVC
I N F A N T R H Y T H M S
Sinus Sin.Brad Sin.Tach
Battery low
Ignore
ON/ Off shock
normal
weak
absent
Page 6
2 00
®
VFcoarse VFfine Asystole
Atr.Flutt. Atr.Fibr. Atr.Tach
3°AVB Junctional Junc.Tach
PAC PJC
SVT VT VF
Asystole
Change
Pulse Paroxysmal rhythm